How to maintain the injection molding machine

In the injection molding industry, the maintenance of equipment is essential. It is not only related to production efficiency and product quality, but also directly affects the service life of the equipment.The following is a detailed guide on how to maintain our company's horizontal injection molding machine RUN and CHX models.

Maintenance of RUN model of horizontal injection molding machine
Daily maintenance：

Cleaning and lubrication: Regularly clean the outer surface and the covers of the RUN model injection molding machine to keep the inside and outside clean, oil-free and dust-free.
。At the same time, ensure that all moving parts are properly lubricated, reduce wear and improve efficiency
。

Check the hydraulic system: check whether the oil surface of the fuel tank is on the line of the oil surface meter, and replenish it in time when it is insufficient.
。At the same time, check the oil cylinder and oil pipe joints for oil leakage to ensure the normal operation of the hydraulic system.
。

Check the cooling system: make sure that the cooling water circuit is smooth, whether the water pipe valve and the cold water tower are open, and whether the water pipe is clogged.
。

Check the electrical system: check the power lines and components for aging, and replace them according to the situation.
。

Regular maintenance：

First-level maintenance: including confirming whether the emergency stop button can cut off part of the motor power supply of the oil pump, and checking whether the temperature sensor needle and the heating cylinder are working normally.
。

Secondary maintenance: The equipment administrator is responsible for formulating the secondary maintenance plan and filling in the "Annual Equipment Maintenance Plan"
。

Maintenance of horizontal injection molding machine CHX model
Daily inspection：

Check the safety devices: ensure that all safety devices of the CHX model injection molding machine are in good condition, and overhaul and maintain them
。

Check the heating system: check whether the electric heating part reaches the set temperature within the specified time range, and check whether the fastening screws of the heating ring are loose, and whether the thermocouple wiring and contact are good.
。

Regular maintenance：

Lubrication system inspection: Check whether the lubrication system is operating normally and whether the lubricating oil in the fuel tank of the lubricating oil pump is clean enough (no water, no impurities, no deterioration)
。

Mechanical inspection: Check whether the screws are loose in each mechanical fastening part.If it is found to be loose, stop and tighten in time
。

Special note：

For RUN and CHX models of injection molding machines, we provide 24-hour online service. Each injection molding machine can scan the barcode label on the machine, providing timely and fast network services and technical response.

Through the above maintenance measures, we can ensure that our horizontal injection molding machine RUN and CHX models maintain the best performance, extend the service life of the equipment, and improve production efficiency.Our company is committed to providing customers with comprehensive technical support and services to ensure that your injection molding machine is always in the best condition.